Latest Projects Based on Propeller

Glider is nothing but a type of Aircraft which can fly up to a certain amount of time depending on the design and the area of lifting surface. They might have an engine for altitude gliding which can be turned off after critical lift generation. There are wide varieties differing in the construction of their wings, aerodynamic efficiency, location of the pilot, controls and intended purpose. Some basic lightweight materials like wood, plastic, and other polymer foams are generally used for manufacturing gliders.

Here you are going to learn about how to make an automatic flying robot called UAV. Nowadays everything is becoming an automatic system where you are able to reduce the human errors as much as possible.

These days drones are playing a very important role in all the sectors including the surveying lands. Drones make surveying of lands much faster than the conventional methods. Now drone simplifies the collection and analysis of geospatial data, allowing professionals to make better decisions.

Generally, as we know drones are can able to perform position held in the outdoors with the help of GPS module. In case if it is indoor it's very difficult to perform position hold why because the GPS cannot be able to receive the satellite signal.

It's a combination of both fixed wing and multi-copter. For flying fixed wing drone you need a bigger area for takeoff and landing. For multi-copter, you don't need a bigger area for takeoff and landing. But the fixed wing can carry more loads with less power consumed than the multi-copter. For the multi-copter, you don't need more area where it can fly any places.

Recent times all the drones are coming along with the obstacle avoidance technology where it can able to sense any kind of obstacle by using the sensors. This technology protects the drone from crashing.

Gesture recognition technology helps you to communicate or control any other devices via your hand gestures. From this technology, you can control the drone simply by moving your hands.

In conventional drone lipo batteries are used as a power source where you need to charge for every particular time period. The charging time alone will be taking more time due to which you cannot do continues flying. By adding the IC engine and DC generator with the conventional drone you can build a hybrid drone.

Whatever the drone that is available in the market, it has the endurance of maximum 30 - 40 minutes only. Once the battery got discharged, again that battery needs to be recharged completely to go for the next ride. Also it takes a lot of time to get recharged, which is a major issue in most of the UAVs that we see today.

Vertical takeoff and landing RC plane does not require more area for taking off and landing. To make this vtol we need a flight controller which can act as a brain of the vtol.

For a flying drone, people should have minimum knowledge of the flying skill then only they can able to fly properly without crashing, but it's not possible for all the people. If it is voice controlled means anyone can fly without any skill.

This is one of the most widely used UAV in all the places for different types of applications. Whether it is a quad or hexa or octa copter, this concept is the most widely used one. Here you are going to learn how to build a multicopter UAV.

Drones are something we call as UAV(unmanned Aerial Vehicles) an aircraft without an human pilot. UAVs are basically an ground controlled system means they are fully Autonomous. Application of Drones are expanding from commercial, scientific, recreational, agricultural, and other applications.IT can be used in Landways, waterways, airways or in space. The advantage of Saucer shape is that is more aerodynamic as compared to other shapes and as it has only one rotor its quite difficult to fly.Due to is shape its having some angle 30 to 60 degree when the drone is parallel to ground. The use of solar here to increase the endurance of the flight by transferring power to the Rechargeable battery. Well, it's difficult to obtain the optimum amount of voltage and current (V= IR).

Remote Controlled helicopter world there are basically of two types one with two types of blades on top (co axial blades) and once with one side of blades on top. And a active tail motor/rotor at the back which will give yawing stability (newton third Law). they also have gear and shaft for drive. Vet cool about this helicopter is that you can fly around your house. There are two motors one is at front which will control the rotation of helicopter with help of ESC and second one is micromotor at the tail part with micro prop. Lipo battery as a continuous power source for your model servo for bending of Swash plate.

A new wind turbine generator system (WTGS) is introduced, and its mathematical model, blade pitch control scheme, and nonlinear simulation software for the performance prediction are presented. The notable feature of WTGS is that it consists of two rotor systems positioned horizontally at upwind and downwind locations, and a generator installed vertically inside the tower.

Due to lack of circulation, water can become stale and undrinkable. In order to ensure safe and clean drinking water on board, your boat freshwater system needs to be sanitized if it hasn’t been used for some time, for example before your first use of the system after your boat has been stored for the winter. In order to clean boat water tanks, you have to remove the old water before starting the disinfection procedure.

About the project

Drones are everywhere in the world. It is estimated that by the year 2020 there will be approximately 7 million drones in the sky and looking the trend it is important to ensure that drone enthusiasts are operating in a peaceful and safe manner.

Heartbeat sensing without some physical connection utilizing signal and image processing is one of the best techniques. This drone project gives an effective way for remotely estimating heart rate and respiratory rate from video recorded by a flying unmanned aerial vehicle (UAV). Image-processing systems connected with particularly designed algorithms support drones to detect changes in people at once, while people are moving. 

Swept wing is a type of wing configuration used in fixed-wing aircraft. There are two types: Swept-back (wing is angled backward) and Swept forward (wing is angled forward). This project deals with the fabrication of forward-swept wing remotely controlled aircraft. Forward-swept wing aircrafts are highly maneuverable (ability to change direction quickly) at low speeds and drag produced is also low compared to backward-swept wing aircraft. The characteristic "sweep angle" is usually estimated by drawing a path from root to tip, twenty-five percent of the way back from the leading edge, and matching that to the perpendicular to the longitudinal axis of the aircraft.  Wing sweep has the effect of delaying the shock waves and accompanying aerodynamic drag rise caused by fluid compressibility.

In the modern world, it takes more than the required time to reach from one place to another, thus we must look forward to some airways. A Quadrotor is one of the flying unit used to lift the object from one place to another in lesser time and it finds high demand in industrial and surveillance sectors. For industry-level applications quadrotors are built using pre-programmed Flight Controllers which will have inbuilt gyroscope and accelerometer, but for smaller applications, it is not applicable. By using Arduino as a flight controller for quadrotor we can make it efficient and affordable for smaller applications.

Drone swarm is a way towards the coordination of many drones as a single system. Multi-robot systems own greater adaptability, performance, and safety than individual robots, a crew of collaborative robots can do a particular task much quicker and execute tasks beyond the limits. Swarm robots can perform a complex task easily with the help of many specialized simple robots. Drone Swarm is the mixed technology of swarm robotics and UAV systems.

In today’s world drones are widely used for various applications. A lot of cool things can be done with the help of drones. Drones with quad configuration are used for major application because of the following reasons: simple in design, agility and easy to control. But the quad configuration has some disadvantages like more power consumption compared to tri and twin copters, Quad frame occupies more area and flight time is also less.

Drones are popular due to their simplicity, agility and wide range of applications. But drones are also used for illegal activities like destroying property, smuggling, injuring people, spying and so on. Illegal usage of drones became a global issue. Now that anyone can become a drone pilot with some basic knowledge in drone and some few hundred bucks. With the flooded technology in the market, it is difficult to prevent the misuse of drones. A large-sized commercial plane can be easily grounded using a small drone.

Drones are Unmanned Aerial Vehicles which finds application in different fields. Nowadays drone racing gained more popularity and experts claim it will be even more popular in the near future. However, drones used for racing are not the same as the commercial drones used for photography and delivery. Racing drones are small quads that specially built for racing. They are designed to be more agile and travel at higher speeds to perform complex stunts.

Drones are evolving day by day as more investment and innovative ideas bring advanced drones to the market. Drones are used for various applications like surveillance, delivering packages, inspecting crops, firefighting and so on. In this project, you will learn about a drone that is controlled by compressed air. Generally, drones are powered by electric motors to produce thrust and to control the direction. Using electric motors will increase the drone weight and it consumes more power. So, large-sized batteries are required to power the drone for a longer period.

Drones are Unmanned Aerial Vehicles which are remotely operated by a pilot or with the help of computers. In earlier days drones were used only for military purpose, With the evolution in technology and to reduce the risk of humans later drones are developed for civil purposes like mapping, surveying, firefighting and so on.

There are different types of security system that are available in the world but most of them are having some disadvantages. One of the disadvantages is Closed Circuit camera is fixed on the walls and can record only one side at a time, so it can be damaged from the other side.

Hovercrafts are vehicles that travel over the cushion of air created with the help of motors and propellers. Hovercrafts can reach almost all the terrains on earth. The principle behind the development of air-cushion is the closed plenum effect. The high-pressure air is accumulated below the hull with the help of motors and propellers. The skirt is used to increase the ground clearance of the vehicle which helps to achieve the smooth ride over big tide waves, rocky terrains, etc. In this article, you will learn to build an RC Hovercraft using Arduino.

In this project, you will learn how to build a fire fighting drone, which can able to detect and put off the fire both autonomously and manually. Making a final year project on drones will definitely help you to build a nice career. 

In recent years drones gained more popularity because of its wide range of applications and the day to day advancements in their features. Fire fighting is one of the difficult tasks where firefighters risk their lives to save the victims. To make the rescuing process easy and safe, drones are implemented to extinguish the fire.

A flock of birds can easily bring down a billion-dollar aircraft. You might have read some news like aircraft is halted or crash happened because of a bird strike. In the US alone there were 142,000 bird strikes happened between 1990 and 2013 which killed 24 people and destroyed 64 civilian aeroplanes.

Birds are not only affecting the aviation industry but also other fields like Agriculture, Marine docks, Football grounds, etc.

In this drone project, we will try to figure out a solution to the above-mentioned problems caused by birds. Nowadays drones gained huge popularity because of the following features such as manoeuvrability, easy to control, low manufacturing cost, etc.

Here we are going to implement drones to scare/control the birds by producing ultrasonic sounds (Bird repellant) without making any harm to the birds as well as the environment.

Nowadays drones are gaining popularity very fast because of their wide range of applications. In this project, we will see how to develop an agricultural drone and what all things can be done using it.

Due to the depletion of natural resources, all the farmers started implementing Precision agriculture (PA). Precision Agriculture is a technique that uses Information Technology to give the crops and soil what exactly is required which ensures sustainability, profitability and protection to the environment.

Technological advancement has proved the impossible things as possible. Similarly, the recent innovations in UAV’s (Unmanned Aerial Vehicles) which are commonly known as drones paved the way for the newer way of transportation not only for carrying goods but also to carry humans from one place to another.

Increased usage of Automobiles like cars, bikes in the metro cities escalated the traffic and also increased pollution. To overcome both the issues here we are going to develop a drone project which can able to carry passengers from one place to another like a taxi.

Drones are getting advanced day by day and their usage also increased in various fields. With the help of drones, you can able to accomplish various types of missions by spending less. In this drone project, we will discuss how to build a drone with terrain following mode using the Mission Planner software.

Crowd control and monitoring is a difficult task for the police forces if the strength of the crowd is huge. Usually, the police will use tear gases to disperse the crowds in uncontrolled situations but during this process, the police might be injured to avoid such situations we can use the drone to control the crowds.

With the advancement in technologies, the usage of drones increased a lot. In this drone project, we will propose a solution to this problem.

The use of Unmanned Aerial Vehicles (UAV) and Unmanned Underwater Vehicles (UUV) in both military and commercial sectors have expanded greatly in recent years. The advancement in technologies paved a way for developing a single vehicle which is capable of working on both Air and underwater environment.

In this drone project, you are going to develop a fixed-wing drone that can able to fly like an aircraft and swim like a fish.

Recent advancement in aerospace and automobile paved the way for new gadgets. Hoverbike is one such innovation which combines the technology of helicopter and bike to make the transportation better.

In this aeronautical project, we will discuss the design consideration, applications and materials used to build the hoverbike. Also, you will learn to build a miniature hoverbike.

Drones are becoming more popular than ever due to their unimaginable applications and fascinating modifications. Along with their applications, the manufacturing cost of the drones also will increase. To overcome the above problem in this project idea, we are going to propose a solution. The best way to reduce the cost is by reducing the components used.

Modular drones are aerial vehicles which can be modified on the go. A single drone can be modified and used for various purposes. For example, you want the drone to capture high-quality videos - use an HD camera mod or you want to use the drone to convey information - fix the speaker mod or you want the drone to display something - attach the screen mod.

Generating power from winds is the purest form of energy generation method when compared to other energy generation methods like thermal powerplant, nuclear power plant, etc. It also doesn’t affect the atmosphere by releasing harmful gases like Carbon dioxide or Carbon monoxide. But for generating electricity from the wind needs a huge setup such as blades, pillars, generators, etc. It also requires a lot of maintenance after the implementation. The cost of setting up the wind turbine is also very high.

In this aeronautical project idea, we will propose an innovative solution to generate electricity from the wind. We are going to develop an Airborne wind energy system to replace the traditional windmills.

Drones are the major innovation of this century which is widely used for various applications. They already proved their ability in various fields. Here we are going to use tethered drones to generate power from the wind. Here the drones are launched in the air and positioned at an altitude of 600-1000 feet. At this altitude, the turbulence of the wind will be less compared to the altitude where the conventional wind turbine is positioned.

Drones or Unmanned Aerial vehicles are used widely to do various things in fields like logistics, rescue, surveillance, inspection, and many more. More innovations are happening in the structure of the aerial vehicles to reduce the size of the aerial robot to make it more agile. Multirotors are more stable than fixed-wing but the size of the drone and the rotor positioning make it inaccessible in small areas.

In this drone project, we will try to implement biomimicry design in aerial robots to solve the structural issue in accessing small areas. Aerial transformation is one way to solve the problem. Here we are going to implement a biomimicry design similar to snake with the help of multi-link structure. This provides the ability of multi-degree of freedom aerial transformation. 

Drones are Unmanned Aerial Vehicles that finds its applications in various fields from delivering packages to surveillance, agriculture and many more. In this drone project, we are going to develop an autonomous seed sowing drone that can be used to plant trees in both agricultural fields and forest. 

With the help of tree planting drones, you can plant a large number of trees quickly in less time. Seed sowing drones can be used for reforestation to plant a large number of trees that are destroyed due to forest fire or natural calamities. 

Farmers and environmental agencies are facing difficulties in planting the trees or sowing seeds in the field. This seed sowing drone provides an effective solution to solve the problem by sowing seeds quickly with more accuracy. These drones are operated in a swarm to cover the large area in less time. 

The unmanned Aerial Vehicle or Drone is one of the best innovations of mankind. From photography, surveillance, public safety, logistics, law enforcement, agriculture, and many other fields, drones are deployed to ease the work. Though the drone has a variety of advantages the major limitation is flight time. Even the advanced drones have a flight time of 30 minutes only. 

In this drone project, we are going to solve this problem by developing a tethered drone. With tethered drones, the endurance of the flight is increased compared to free-flying drones.

Latest Projects based on propeller